Alarm Lock PDL6100 Instruction Manual download pdf (Page 17)

; 1 2 ; 0 0 0 :

12. Clear All Schedules and Timeout Functions

Function 12 clears all programmed Schedules and all Timeout Functions. (To clear All Timeout Functions only, see

Function 13 below). Function 12 will clear all of the following: All Schedule Functions 72 through 93, Timeout Functions

5, 25 through 34 and Function 47. Note: Function 12 also resets Passage Mode and any disabled Groups. After using

Function 12, your Scheduled/Timeout features must be manually re-programmed.

NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to

program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the timeout

will remain.

; 1 3 ; 0 0 0 :

Function 13 clears all Timeout Functions. (To clear All Schedules and Timeout Functions, see Function 12 above).

Function 13 will clear all of the following: All Timeout Functions 5, 25-34 and Function 47. After using Function 12, your

Scheduled/Timeout features must be manually re-programmed.

NOTE: Up to 4 Timeout Functions may be pending at any one time. An error beep will sound when attempting to

program more than 4 Timeout Functions. This Function only disables the timeout; the event associated with the timeout

will remain.

13. Clear All Timeout Functions

(This Function enabled through keypad only)

CLEAR FUNCTIONS

Group Enable/Disable

Enter the functions below to Enable/Disable Groups. Functions 14 - 23 will each override

existing scheduled events. Therefore, Functions 14 - 23 are temporary, take effect im-

mediately, and are always overridden by future scheduled events that already exist within

the lock programming.

GROUPS

24. Reserved

; 1 4 :

; 1 5 :

16. Disable Group 3

; 1 6 :

17. Disable Group 4

; 1 7 :

18. Disable All Groups

; 1 8 :

19. Enable Group 1

; 1 9 :

20. Enable Group 2

; 2 0 :

21. Enable Group 3

; 2 1 :

22. Enable Group 4

; 2 2 :

23. Enable All Groups

; 2 3 :

14. Disable Group 1

15. Disable Group 2

Programming Functions (cont'd)

Important: It is the responsibility of the lock programmer to verify the proper lock/unlock conditions and Group conditions

after programming the lock with Function 12 and 13.

PRIORITY ORDER

1. Disabled Users

2. Enabled Groups

3. Disabled Groups

4. Enabled Users

The Priority Order details which Function

will take effect before ("have priority over")

others. For example, as per the list above,

Enabled Users have the lowest priority,

and other Functions can affect the status

of these Users. Disabling a Group

(Functions 14-18) will take priority over the

enabled Users in that Group, disabling

them. Enabling Groups (Functions 19-23)

will take priority over those tasks lower in

the list, and finally disabling a User

(Function 3) takes priority over all other

tasks listed.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 35 36

Comments to this Manuals

No comments

Alarm Lock PDL6100 Instruction Manual Page 17

Comments to this Manuals

Related products and manuals for Security access control systems Alarm Lock PDL6100