Alarm Lock TRILOGY DL2700 User Manual Page 17

  • Download
  • Add to my manuals
  • Print
  • Page
    / 24
  • Table of contents
  • BOOKMARKS
  • Rated. / 5. Based on customer reviews
Page view 16
15
Strikes for model 11A:
Model 210K
Strike for single or double inswinging door(s) (not
included with 11A)
Model K24A
Strike for single outswinging door (included with
11A)
Model K28
Strike for double outswinging doors (not included
with 11A)
Narrow stile mounting bars
Model 99
(pair) not shown
3/8” x 1” anodized aluminum bar – US28 finished.
For mounting Model 11A to narrow stile (glass)
doors. Specify 36” or 48”. (Not Shown)
Rim cylinder
Model CER
Required for interior arming/disarming of models
11A, 80, 250, 260, 700, 710 & 715. Includes two
keys (KA or KD)
Mortise cylinder
Model CEM
Used with the Pilfergard models PG10 and
PG21/E to arm and disarm the alarm circuit.
Includes two keys (KA or KD)
Cylinder finger pull
Model 711
An inexpensive door pull for use when outside
key only access is required.
Outside access door pull
Model 707
For access from building exteriors. Installed on
the outside of the door and linked to the lock.
After deadbolt is retracted by outside key, a
slight pull will release the deadlatch and open
the door. 8” x 1 1/2”. (For use with all models
except Model 11A).
Battery eliminator
Model PP100
For use with all PG10, PG21/E, PG30,
250, 700, 80, 260, 710 and 715 models.
The PP100 conserves the battery
which automatically takes over as the
power source to sound the alarm in the
event of a power failure or intentional
cut-off. A built-in circuit breaker with push-button
reset eliminates troublesome fuse replacements. Includes
a cam lock cylinder and 6’ of armored cable adequate to
provide a door loop at the hinged-side of the door. Can be used
with all 6V and 9V models.
Double door holder
Model 44
The Double Door Holder secures the
inactive door to the frame while the
active door is closed. Releasing the
active door automatically allows both doors to swing freely.
Reversible, right or left hand doors. Cast aluminum 8 1/2” long,
3” wide and 2 1/2” high.
Armored door loop
Model 271
For use with electrified locks. An easy
means for bringing electric current from
the hinge side of a door frame to the
door. 18” flexible armored cable. End brackets are deep drawn
anodized aluminum to conceal wire connections.
Single door strike
Models 730 & 725
Model 730 supplied with models 250, 700 and
80.
Model 730M supplied with models 260 and
710 and 80. Model 735 supplied with model
715.
Double door strike
Models 732 & 735
Model 732 for use with models 250, 700 and 80.
Model 732M for use with models 260 and 710.
Model 735 for use with model 715. (Not Shown)
Alarm Lock: Essential add-ons and extras
Page view 16
1 2 ... 12 13 14 15 16 17 18 19 20 21 22 23 24

Comments to this Manuals

No comments