Alarm Lock DL6100 Instruction Manual download pdf (Page 27)

; 9 9 ; 0 0 0 :

99. Clear All Lock Programming

(This Function enabled through keypad only)

Clears all programming, and returns lock to factory default settings. Audit Trail contents

are maintained.

CLEAR ALL PROGRAMMING

95 - 98. Reserved

92. Enable Group 4

(Open Time Window)

(This Function enabled through keypad only)

; 9 2 ; [ _ ] ; [ _ _ _ _ ] :

(Day) (Time)

Functions 92 and 93 allow you to set up a window of time where if any Group 1 User Code is entered within this window,

Group 4 members will be enabled. (Group 4 members will still need to enter their User Codes to enter). For additional in-

formation, see "Group 1 Activated Features" on page 28.

• For day enter: 1 for Sunday

, 2 for Monday, 3 for Tuesday, 4 for Wednesday, 5 for Thursday, 6 for Friday, 7 for Saturday, 8

for Monday to Friday, 9 for Saturday and Sunday, and 0 for all days of week.

• Enter time of day in 24 hour format (for example, for 2:15 PM, enter 14:15).

Programming Functions (cont'd)

93. Enable Group 4

(Close Time Window)

(This Function enabled through keypad only)

; 9 3 ; [ _ ] ; [ _ _ _ _ ] :

(Day) (Time)

Scheduled Group 4 Enable (Group 1 Activated)

Disable Radio Signal

94. Disable Radio

(This Function enabled through keypad only)

; 9 4 ; 0 0 0 :

Disables the radio signal (RF) link inside the lock, rendering all wireless communication with the selected lock inoperative.

When using a lock without the DL-Windows RF link, it is highly recommended to enter this command to disable all radio access to the

lock. If enrollment in a wireless system should be desired later, simply restart the lock either through the power up "ERASE ALL

PROGRAMMING" procedure (see page 10) or through the use of the ;99;

000: command, then

enroll and reprogram the lock through the DL-Windows interface.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 35 36

No comments

Alarm Lock DL6100 Instruction Manual Page 27