Alarm Lock DL6100 Instruction Manual Page 9
- Page / 36
- Table of contents
- BOOKMARKS
Rated. / 5. Based on customer reviews
9
Programming Key Sequence.
Programming
Information
General Program Mode Information
If a wrong key is pressed during code entry, press the ; key until the error sound is heard (7 short beeps), this will clear the entry. Re-enter the
key sequence again.
All program sequences are followed by the : key; 2 short beeps indicate a successful program sequence.
Enabling/Disabling Users (By User Number)
3. Disable User
; 3 ; [ _ _ _ ] :
4. Enable User ; 4 ; [ _ _ _ ] :
User Number must be between 2 and 5000.
NOTE: Will Enable/Disable users even if the user is associated with an enabled group.
2
Conventions Used in this Manual
LED and Sounder Indicators
The DL6100 Series locks provide visual and audible keypad feedback. With a fully charged battery, the LED and sounder
feedback is as follows:
Minimum Required Program Level
Program Levels are abbreviated as follows:
M = Master
4 = Installer
3 = Manager
2 = Supervisor
This Program Level abbreviation is the
minimum program level required to
access the particular Function. (The
higher the level, the more programming
tasks the User is allowed, with Master
allowing all tasks).
Function
Description
Function
Number
Function Name
ACTIVITY LED SOUNDER COMMENTS
Keypress 1 RED Flash 1 Beep Normal Operation
Access Granted or Remote Release 2 GREEN Flashes 2 Beeps
Remote release enabled through
activation of relay
Invalid Code 7 RED Flashes 7 Beeps Re-enter User Code
Successful Program Entry 2 GREEN Flashes 2 Beeps When in Program Mode
Unsuccessful Program Entry 7 RED Flashes 7 Beeps When in Program Mode
Exit Program Mode 1 RED, 2 GREEN Flashes 10 Beeps
Valid but Disabled Code 1 GREEN, 4 RED Flashes 1 long, 5 short beeps Code exists in memory, but disabled
Low Battery
RED Flashes for
Four Seconds
4-Second Pulsing Beep See page 10 before changing batteries
Emergency Commands are in effect
1 RED Flash every
two seconds
-- --
- Wireless Trilogy 1
- Programming Instructions 1
- Table of Contents 2
- DL6100 LOCK 2
- Lock Features 3
- Supported Products 4
- Lock Design Overview 5
- What is a Group? 7
- What is DL-Windows? 7
- Who are Users 297-300? 7
- Programming Levels 8
- LED and Sounder Indicators 9
- Wiring and Power Up 10
- Quick Start 11
- Quick Start (cont’d) 12
- Testing the Codes Entered 13
- Programming Functions 15
- (By User Number) 16
- PRIORITY ORDER 17
- 38. Set Date 19
- 39. Set Time 19
- 40. Set Weekday 19
- Clock Adjust 20
- Pass Time 21
- Remote Input 22
- 6 7 ; [ _ _ ] : 23
- 67. Add System Features 23
- Scheduled Passage and Group 24
- Enter Key 24
- 90. Relay Activation 26
- (Open Time Window) 26
- 91. Relay Activation 26
- (Close Time Window) 26
- Disable Radio Signal 27
- Assign a User to Two Groups 28
- (cont'd.) 29
- Function 30
- Number(s) 30
- Function Name Programming 30
- Glossary 35
- Glossary (cont'd) 36
Related products and manuals for Security access control systems Alarm Lock DL6100
(9 pages)LG G233 manuels
Manuels d'utilisation et guides de l'utilisateur pour Non LG G233.
Nous fournissons des manuels en pdf 1 LG G233 à télécharger gratuitement par type de document : Manuel de l'utilisateur
Comments to this Manuals