Alarm Lock NETWORXPANEL Instruction Manual download pdf (Page 4)

AL-IM80211

AL-IME

AL-IMEPOE

Supported Products

Proximity Card Reader/Enroller (AL-PRE)

An AL-PRE is used to quickly enroll multiple proximity cards and keyfobs into DL-Windows without the

need to manually type proximity data. Use the supplied 9-pin DB9 to DB9 serial cable (see below for de-

scription) to connect the AL-PRE to your computer’s serial COM port. Compatible with most HID Prox-

Cards

and ProxKey

keyfobs (37 bits or less). For NETPDK models with integral proximity readers only.

ProxCard

/ ProxKey

Keyfob

Compatible with most HID ProxCards

and ProxKey

keyfobs (37 bits or less). For NETPDK models

with integral proximity readers only.

Note: ProxCard

and ProxKey

are trademarks of the HID

Corporation.

HID

HID CORPORATION

DB9 to DB9 Serial Cable

Enroll proximity cards and keyfobs quickly by using the AL-PRE to DL-Windows by connecting one end

of this 9-pin male DB9 to female DB9 serial cable to the AL-PRE and the other end to your computer’s

serial COM port. If your computer does not have a serial COM port (DB-9 male) available, use the USB

to RS-232 Cable described below.

USB to RS-232 Cable

If your computer does not have a serial COM port (DB-9 male) available, you can plug your AL-PCI2 cable

into a special USB to RS-232 cable. Order part MX1130 for the USB to RS-232 cable only.

AL-IMEPOEP

AL-IM SERIES WI-FI Gateway Module

The NETWORXPANEL contains a radio that transmits and receives data--via a private wireless signal--to

an intermediate device called a Gateway module. In turn, this Interface Module is connected (either

wirelessly or wired) to a computer network such as a LAN or corporate Intranet. A Windows PC connected

to this network can control and program all NETWORXPANEL control panels by the use of the DL-Window

software (see OI237 and OI352). With access rights to the software, one computer--or several--can control

the software and consequently can control the devices in the system. Several Gateway device models are

available:

• "Wireless/Wired" AL-IM80211 Hardwired/Wireless Gateway Interface Module. Supplied with its own

class 2 transformer to supply power and supports connection to a network either using 802.11 or a

standard Ethernet cable. This "Wireless/Wired" Gateway module has two antennas, one for the

proprietary radio connection to the NETWORXPANEL and the other for 802.11 network transmissions.

Ensure adequate 802.11 coverage in the area where the "Wireless/Wired" Gateway is mounted.

Supports up to 63 Networx Locks. Ceiling- or wall-mountable.

• "Wired" AL-IME Hardwired Gateway Interface Module, supports up to 63 Networx Locks, connects

directly to a network using a standard RJ-45 Ethernet cable. This model has one antenna used to

transmit to the NETWORXPANEL via an Alarm Lock proprietary radio connection.. Ceiling- or wall-

mountable. Powered with Class 2, 6VAC transformer (supplied).

• "Power over Ethernet" AL-IMEPOE Hardwired Gateway Interface Module + POE (Power Over

Ethernet), supports up to 63 Networx Locks, connects directly to a network using a standard RJ-45

Ethernet cable and POE. This model has one antenna used to transmit to the NETWORXPANEL via

an Alarm Lock proprietary radio connection. Ceiling- or wall-mountable.

• Gateway "Plenum Rated POE" AL-IMEPOEP - Same as above "AL-IMEPOE", with added enclosure

protections and installation hardware for mounting above "drop-ceiling" tiles or other locations subject

to air pressure changes (HVAC air-filled spaces, etc.).

1 2 3 4 5 6 7 8 9 ... 35 36

Comments to this Manuals

No comments

Alarm Lock NETWORXPANEL Instruction Manual Page 4

Comments to this Manuals

Related products and manuals for Security access control systems Alarm Lock NETWORXPANEL