Alarm Lock NETWORXPANEL Specifications download pdf (Page 13)

NX-592E NetworX Cellular Module Installation Sheet

added again. Clear the device by deleting (excluding) it from its

network.

Note: The Alarm.com module can be used to delete devices in

any network. The device will clear itself and be able to be

added to another network. The device’s old network will still list

that device as part of its network (but the device will not be

able to be controlled by that network) until the device is

removed from its old network.

Specifications

Compatibility

NetworX panels: NX V2 4, 6, 8 and 8E.

(Note: certain older V1 NX4, 6 and 8 may

not be fully supported).

Voltage

9.5 to 15 VDC, 12 V nominal, 65 mA

(continuous), 1600 mA (instantaneous

peak), maximum from panel or auxiliary

power supply

Cellular network

1xRTT CDMA Verizon; 3G HSPA AT&T, T-

Mobile or Rogers

Power/data bus

One 3-wire NetworX power/communication

data bus

Indicators

One module/panel communication status

LED, one module power LED, one

automation LED, three wireless

communication status LEDs, and 4 GSM

status LEDs

Dimensions

5.25 × 4.125 × 1 in. (133 × 105 × 25 mm)

Case color

Belgian gray

Case material

High-impact, ABS plastic

Operating temperature

32 to 120ºF (0 to 49ºC)

Storage temperature

-30 to 140ºF (-34 to 60ºC)

Relative humidity

90% noncondensing (maximum)

Regulatory information

FCC

Changes or modifications not expressly approved by UTC Fire

and Security can void the user’s authority to operate the

equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates, uses, and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications.

However, there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment in to an outlet on a circuit different from that

which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

This equipment complies with the FCC RF radiation exposure

limits set forth for an uncontrolled environment. This equipment

should be installed and operated with a minimum distance of

20 centimeters between the radiator and your body.

Under Industry Canada regulations, this radio transmitter may

only operate using an antenna of a type and maximum (or

lesser) gain approved for the transmitter by Industry Canada.

To reduce potential radio interference to other users, the

antenna type and its gain should be so chosen that the

equivalent isotropically radiated power (e.i.r.p.) is not more

than that necessary for successful communication.

Conformément à la réglementation d'Industrie Canada, le

présent émetteur radio peut fonctionner avec une antenne d'un

type et d'un gain maximal (ou inférieur) approuvé pour

l'émetteur par Industrie Canada. Dans le but de réduire les

risques de brouillage radioélectrique à l'intention des autres

utilisateurs, il faut choisir le type d'antenne et son gain de sorte

que la puissance isotrope rayonnée équivalente (p.i.r.e.) ne

dépasse pas l'intensité nécessaire à l'établissement d'une

communication satisfaisante.

This device complies with Industry Canada license-exempt

RSS standard(s).

Operation is subject to the following two conditions: (1) this

device may not cause interference, and (2) this device must

accept any interference, including interference that may cause

undesired operation of the device.

Le présent appareil est conforme aux CNR d'Industrie Canada

applicables aux appareils radio exempts de licence.

L'exploitation est autorisée aux deux conditions suivantes: (1)

l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur

de l'appareil doit accepter tout brouillage radioélectrique subi,

même si le brouillage est susceptible d'en compromettre le

fonctionnement.

FCC ID: YL6-143200H5V4 (GSM), YL6-143200C5V4 (CDMA)

IC: 9111A-143200H5V4 (GSM)

Contact information

www.utcfireandsecurity.com or www.interlogix.com

For customer support, see www.interlogix.com/customer-

support

1 2 ... 8 9 10 11 12 13

Comments to this Manuals

No comments

Alarm Lock NETWORXPANEL Specifications Page 13

Comments to this Manuals

Related products and manuals for Security access control systems Alarm Lock NETWORXPANEL